MIL-STD 810F/MIL-STD 810G材料耐氙灯老化测试仪 返回列表页

支持6500W大功率精密水冷式氙灯灯管

• 总曝晒面积：6,500 cm2 (1,008 in2)
• 自动旋转式3层样品架
• 大屏幕全彩色TFT显示自动诊断信息
• 直接设置和控制辐照度340nm、420nm、300-400nm
• 直接控制箱内温度及黑板或/和黑标温度

支持6500W大功率精密水冷式氙灯灯管

• 总曝晒面积：6,500 cm2 (1,008 in2)
• 自动旋转式3层样品架
• 大屏幕全彩色TFT显示自动诊断信息
• 直接设置和控制辐照度340nm、420nm、300-400nm
• 直接控制箱内温度及黑板或/和黑标温度
• 直接设置和控制相对湿度
• 直接设置和控制试验舱内空气温度
• 显示诊断信息
• 内置14个zui主要标准
• 支持12个客户自定义编程
• 多语种显示（中、英、法、德、西、日、韩）
• U盘数据输出接口
• 内置的Smart Damper™自动送风风速调节及智能化调风系统
• 内置的Smart Light™智能化灯光监测系统
• 样架背面喷淋系统
• 过滤组合以满足全部测试标准
• 进气管除尘过滤器
• CS-7氙灯冷却系统
• 自动水质监控及自动报警
• 参照氙灯校准
• 试验箱观察窗
• 通用电源系统，适用于各种频率、电压和电气要求
• 电气安全性能满足CE、UL、CSA、EN、ISO标准
• 以辐照量和时间为单位自动倒计时功能
• 样品架可容纳多种类型的样品
• VibraSonicTM加湿系统
•  

选项

BPT/BST双控：可选

• 辐照度控制：340/420或300-400nm选择单点自动控制,可选第二点监控
• 安装在风道里的制冷线圈（不包含必要的制冷装置）
• S3T特定试件表面温度系统
• View（气候观察）数据获取系统
• LiquiAirTM - LiquiAir热交换器可减少Ci5000氙灯冷却系统对自来水的需求，该系统采用室内外的空气来冷却氙灯水。
• 室内空气和去离子水制冷
•  

 可选配置

样品面独立辐照度校准及测量的XenoCal辐照度校准装置

• 满足特殊测试要求的辅助过滤灯罩
• Caster（4脚）包括适配器和安装说明
• LS-200全谱监测设备
• 伸展腿（4脚：提升装置 15厘米）

AATCC TM169
Weather Resistance of Textiles: Xenon Lamp Exposure

• ASTM C1257
  Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants
• ASTM C1442
  Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus
• ASTM C1501
  Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures
• ASTM C732
  Standard Test Method for Aging Effects of Artificial Weathering on Latex Sealants
• ASTM C734
  Standard Test Method for Low-Temperature Flexibility of Latex Sealants After Artificial Weathering
• ASTM C793
  Standard Test Method for Effects of Accelerated Weathering on Elastomeric Joint Sealants
• ASTM D1148
  Standard Test Method for Rubber Deterioration?Discoloration from Ultraviolet (UV) or UV/Visible Radiation and Heat Exposure of Light-Colored Surfaces
• ASTM D1670
  Standard Test Method for Failure End Point in Accelerated and Outdoor Weathering of Bituminous Materials
• ASTM D2565
  Standard Practice for Xenon Arc Exposure of Plastics Intended for Outdoor Applications
• ASTM D3424
  Standard Test Methods for Evaluating the Relative Lightfastness and Weatherability of Printed Matter
• ASTM D3451
  Standard Guide for Testing Coating Powders and Powder Coatings
• ASTM D4101
  Standard Specification for Polypropylene Injection and Extrusion Materials
• ASTM D4303
  Standard Test Methods for Lightfastness of Pigments Used in Artists' Paints
• ASTM D4355
  Standard Test Method for Deterioration of Geotextiles from Exposure to Ultraviolet Light and Water (Xenon-Arc Type Apparatus)
• ASTM D4434
  Standard Specification for Poly(Vinyl Chloride) Sheet Roofing
• ASTM D4459
  Standard Practice for Xenon-Arc Exposure of Plastics Intended for Indoor Applications
• ASTM D4798
  Standard Test Method for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
• ASTM D4811
  Standard Specification for Nonvulcanized (Uncured) Rubber Sheet Used as Roof Flashing
• ASTM D5010
  Standard Guide for Testing Printing Inks and Related Materials
• ASTM D5019
  Standard Specification for Reinforced CSM (Chlorosulfonated Polyethylene) Sheet Used in Single-Ply Roof Membrane
• ASTM D5071
  Standard Practice for Exposure of Photodegradable Plastics in a Xenon Arc Apparatus
• ASTM D5383
  Standard Practice for Visual Determination of the Lightfastness of Art Materials by Art Technologists
• ASTM D5398
  Standard Practice for Visual Evaluation of the Lightfastness of Art Materials by the User
• ASTM D5819
  Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability
• ASTM D6083
  Standard Specification for Liquid Applied Acrylic Coating Used in Roofing
• ASTM D6551
  Standard Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Xenon-Arc Exposure Apparatus
• ASTM D6577
  Standard Guide for Testing Industrial Protective Coatings
• ASTM D6662
  Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards
• ASTM D6695
  Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings
• ASTM D6878
  Standard Specification for Thermoplastic Polyolefin Based Sheet Roofing
• ASTM D7869
  Standard Practice for Xenon Arc Exposure Test with Enhanced Light and Water Exposure for Transportation Coatings
• ASTM F1164
  Standard Test Method for Evaluation of Transparent Plastics Exposed to Accelerated Weathering Combined with Biaxial Stress
• ASTM G151
  Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
• ASTM G155
  Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
• FLTM BO 116-01
  Resistance to interior weathering
• GB/T 8427
  Textiles - Tests for color fastness - Color fastness to artificial light: Xenon arc fading lamp test
• GM 9125P
  Procedures for Laboratory Accelerated Exposure of Automotive Materials
• GME 60292
  Designation of Colour Fastness and Resistance to Artificial Light
• GMW 14162
  Colorfastness to Artificial Weathering
• GMW 14650
  Performance Requirements for Exterior Plastic Parts
• GMW 3414
  Test Method for Artificial Weathering of Automotive Interior Trim Materials
• IEC 61345
  UV test for photovoltaic (PV) modules
• ISO 105-B02
  Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test
• ISO 105-B04
  Textiles - Tests for colour fastness - Part B04: Colour fastness to weathering: Xenon arc test
• ISO 105-B06
  Textiles - Tests for colour fastness - Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test
• ISO 105-B10
  new standardTextiles - Tests for colour fastness - Part B10: Artificial weathering - Exposure to filtered xenon-arc radiation
• ISO 11341
  Paints and Varnishes - Artificial Weathering and Exposure to Artificial Radiation - Exposure to Filtered Xenon-Arc Radiation
• ISO 12040
  Graphic technology - Prints and printing inks - Assessment of light fastness using filtered xenon arc light
• ISO 16474-1
  Paints and varnishes - Methods of exposure to laboratory light sources - Part 1: General guidance
• ISO 16474-2
  Paints and varnishes - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps
• ISO 18909
  Photography - Processed photographic colour films and paper prints - Methods for measuring image stability
• ISO 3917
  Road vehicles - Safety glazing materials - Test methods for resistance to radiation, high temperature, humidity, fire and simulated weathering
• ISO 4892-1
  Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance
• ISO 4892-2
  Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc sources
• JASO M346
  Light-exposure test method by xenon-arc lamp for automotive interior part
• JASO M351
  Automotive parts - Accelerated weathering testing method by xenon-arc lamp for exterior parts
• JIS B 7754
  Light-exposure and light-and-water-exposure apparatus(xenon arc lamp type)
• JIS D 0205
  Test Method of Weatherability for Automotive Parts
• MIL-STD 810F
  Environmental engineering considerations and laboratory tests - Part 2: Laboratory test methods - 505.4: Solar radiation (Sunshine)
• MIL-STD 810G
  Environmental engineering considerations and laboratory tests - Part 2: Laboratory test methods - 505.5: Solar radiation (Sunshine)
• Peugeot Citroen (PSA) D47 1431
  Materials and Parts in the Passenger Compartment Appearance Behaviour to Artificial Light at High and Mean Temperatures
• SAE J1885
  Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Water Cooled Xenon-Arc Apparatus
• SAE J1960
  Accelerated Exposure of Automotive Exterior Materials Using a Controlled Irradiance Water-Cooled Xenon Arc Apparatus
• SAE J2412
  Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Xenon-Arc Apparatus
• SAE J2413
  Protocol To Verify Performance of New Xenon Arc Test Apparatus
• SAE J2527
  Performance Based Standard for Accelerated Exposure of Automotive Exterior Materials Using A Controlled Irradiance Xenon-Arc Apparatus
• VDA 621-429
  Tests for automotive coatings - Weathering test for colour fastness
• VDA 621-430
  Tests for automotive coatings - Test for resistance to cracking of 2 layer metallic clear coats
• VDA 75202
  Automotive interior materials - Colourfastness and ageing test against light at high temperatures: Xenon arc
• VW PV 3930
  Non-Metallic Materials - Weathering in Moist, Hot Climate

MIL-STD 810F/MIL-STD 810G材料耐氙灯老化测试仪MIL-STD 810F/MIL-STD 810G材料耐氙灯老化测试仪